Cart 0

Surecom 60W DC - 1GHz PL259 50 Ohm Dummy Load


  • $89.99 CAD
Shipping calculated at checkout.

Will not ship until

The Surecom 60W DC - 1GHz PL259 50 Ohm Dummy Load was built for people like you in mind. Go ahead it's only $39.99 CAD, and we promise not to tell the XYL :)

What is a dummy load?

A Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves, or having to factor in the SWR of the connected antenna.

The Dummy Load is selected in a way so that it has a similar impedance to the real device that will be connected to the RF System (Radio). Not using a dummy load and leaving the port open, can result in some unwanted reflections which can damage the RF System. Also, using a real antenna in the testing phase can result in some unwanted transmission in the lab (RF Radiation) which will interfere with other devices and technologies being tested and used in daily operation. Not to mention standing next to an antenna while outputting 100W RF is not necessarily a good place to be in.


  • Frequency Range: DC to 1GHz.
  • Connector: PL259.
  • Impedance: 50ohm.
Size: (Excluding Connector)
  • 100W 58 x 78 mm
  • 60W 45 x 72 mm
  • 25W 30 x 45 mm
  • 15W 30 x 35mm
    The Fleetwood Advantage
    Fleetwood Digital offers "Pay in 4" with Sezzle!
    Fleetwood Digital offers optional CPS Extended Warranties!
    Fleetwood Figital offers valuable QSO rewards to save on your favourite gear!


    Have a Question?

    Be the first to ask a question about this.

    Ask a Question