Distribucomm
DistribuComm COMMB18 18ft High-Gain Base Station Antenna (10/11 Meter)
DistribuComm COMMB18 18ft High-Gain Base Station Antenna (10/11 Meter)
Impossible de charger la disponibilité du service de retrait
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
Dominate the airwaves with the DistribuComm COMMB18. Standing tall at 18 feet, this fiberglass base station antenna is designed for serious 11-Meter CB and 10-Meter Amateur Radio operators who demand maximum range and power handling.
Unlike old-school aluminum antennas that require complex assembly and ground radials, the COMMB18 uses a modern fiberglass design that is radial-free, making it perfect for mounting on poles, sides of buildings, or in tighter spaces. With a massive 2000 Watt power rating and an easy-to-use external tuning ring, it is built to perform and built to last.
-
📶
High Gain Performance: Delivers an impressive 5.75 dB gain to pull in distant stations and punch through the noise floor.
-
🔧
Easy "Twin-Ring" Tuning: Forget about hacksaws. The external twin-ring adjusters allow you to fine-tune your SWR quickly and easily without cutting the antenna.
-
⚡️
2000W Power Handling: Built to handle high-power setups with ease, rated for up to 2000 Watts to ensure reliability during long transmissions.
-
🔇
Low Noise Design: Features a DC Grounded structure which helps drain static buildup, resulting in a quieter receiver and protection against static discharge.
-
🌬️
Storm Ready: Constructed from heavy-duty fiberglass in 3 screw-together sections, rated to withstand wind speeds up to 90 MPH.
📡 No Radials Required
This antenna does not require a ground plane kit or radials to operate efficiently. This significantly lowers the wind load and makes installation much easier compared to traditional aluminum vertical antennas.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | DistribuComm COMMB18 |
| Frequency Range | 25.5 - 31 MHz (Tunable) |
| Bands | 11 Meter (CB) & 10 Meter (Ham) |
| Height | 18 Feet (5.5 Meters) |
| Construction | 3-Section Fiberglass |
| Gain | 5.75 dB |
| Power Rating | 2000 Watts |
| VSWR | 1.15:1 Max (in CB Band) |
| Connection | UHF Female (SO-239) |
| Wind Rating | 90 MPH |
| Mounting | Mast Mount |
Description
Dominate the airwaves with the DistribuComm COMMB18. Standing tall at 18 feet, this fiberglass base station antenna is designed for serious 11-Meter CB and 10-Meter Amateur Radio operators who demand maximum range and power handling.
Unlike old-school aluminum antennas that require complex assembly and ground radials, the COMMB18 uses a modern fiberglass design that is radial-free, making it perfect for mounting on poles, sides of buildings, or in tighter spaces. With a massive 2000 Watt power rating and an easy-to-use external tuning ring, it is built to perform and built to last.
-
📶
High Gain Performance: Delivers an impressive 5.75 dB gain to pull in distant stations and punch through the noise floor.
-
🔧
Easy "Twin-Ring" Tuning: Forget about hacksaws. The external twin-ring adjusters allow you to fine-tune your SWR quickly and easily without cutting the antenna.
-
⚡️
2000W Power Handling: Built to handle high-power setups with ease, rated for up to 2000 Watts to ensure reliability during long transmissions.
-
🔇
Low Noise Design: Features a DC Grounded structure which helps drain static buildup, resulting in a quieter receiver and protection against static discharge.
-
🌬️
Storm Ready: Constructed from heavy-duty fiberglass in 3 screw-together sections, rated to withstand wind speeds up to 90 MPH.
📡 No Radials Required
This antenna does not require a ground plane kit or radials to operate efficiently. This significantly lowers the wind load and makes installation much easier compared to traditional aluminum vertical antennas.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | DistribuComm COMMB18 |
| Frequency Range | 25.5 - 31 MHz (Tunable) |
| Bands | 11 Meter (CB) & 10 Meter (Ham) |
| Height | 18 Feet (5.5 Meters) |
| Construction | 3-Section Fiberglass |
| Gain | 5.75 dB |
| Power Rating | 2000 Watts |
| VSWR | 1.15:1 Max (in CB Band) |
| Connection | UHF Female (SO-239) |
| Wind Rating | 90 MPH |
| Mounting | Mast Mount |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.