Fleetwood Digital
Heavy-Duty 3/4" Hole Steel Hood & Fender Antenna Mount Bracket for NMO Mobile Antennas
Heavy-Duty 3/4" Hole Steel Hood & Fender Antenna Mount Bracket for NMO Mobile Antennas
Impossible de charger la disponibilité du service de retrait
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
Mount your mobile VHF, UHF, or Land Mobile Radio (LMR) antenna cleanly without drilling holes into the roof of your vehicle. This Heavy-Duty 3/4" Hole Steel Hood & Fender Mount Bracket provides a solid, professional mounting solution designed to secure into the internal body seam between your hood, fender, or rear tailgate seam.
Featuring a standard 3/4" (19mm) mounting hole, this bracket is engineered to accept standard brass NMO cable mounts and heavy-duty whip bases. Its rigid steel construction prevents antenna whip sway on rough logging roads and trail rides, while the textured black finish seamlessly blends into modern truck and SUV bodywork.
🔧 NMO Base Compatibility Notice
This bracket features a standard 3/4" (19mm) circular opening designed specifically for standard drop-in NMO brass mounts, SO-239 bulkheads, and 3/4" stud bases. Please measure your hood/fender seam gap to ensure proper clearance for the 0.6" (15mm) vertical step offset.
Key Product Features
-
📐
Standard 3/4" (19mm) NMO Port: Pre-drilled center hole accommodates all standard 3/4" NMO coax cable assemblies, UHF/VHF bases, and commercial mobile antenna hardware.
-
🚘
0.6" Vertical Offset Profile: Built with a 15mm (0.6") Z-step offset to clear vehicle hood lines, fender lips, and trunk channels without pinching weather stripping.
-
🛡️
Heavy-Gauge Steel Construction: Manufactured from thick steel plate for maximum rigidity, ensuring high-gain dual-band and long whip antennas stay upright during off-road travel.
-
🎨
Textured Black Weatherproof Coating: Durable powder-coated finish protects against corrosion, rust, road salt, and harsh outdoor weather conditions.
-
⚙️
Triple-Slotted Base Mounting: Features a 3-hole base plate (1.13" / 29mm hole spacing) allowing flexible sheet metal screw or bolt attachment directly to inner body channels.
Technical Specifications & Dimensions
| Specification | Dimension / Detail |
|---|---|
| Bracket Dimensions & Hole Sizing | |
| Antenna Hole Diameter | 3/4" (19 mm) Standard NMO / Bulkhead Hole |
| Total Bracket Length | 3.95" (100 mm) |
| Mounting Base Width | 1.62" (41 mm) |
| Mounting Base Length | 1.00" (26 mm) |
| Vertical Step Offset Height | 0.60" (15 mm) |
| Base Mounting Hole Spacing | 1.13" (29 mm) Center-to-Center Outer Slots |
| Material & Equipment Compatibility | |
| Material | Heavy-Duty Formed Steel Plate |
| Finish | Textured Black Protective Powder Coat |
| Mounting Location | Vehicle Fender Seams, Hood Channels, Trunk Lips, or Custom Brackets |
| Antenna Compatibility | NMO Mounts, UHF / VHF / CB / LMR Mobile Antennas w/ 3/4" Base |
Description
Mount your mobile VHF, UHF, or Land Mobile Radio (LMR) antenna cleanly without drilling holes into the roof of your vehicle. This Heavy-Duty 3/4" Hole Steel Hood & Fender Mount Bracket provides a solid, professional mounting solution designed to secure into the internal body seam between your hood, fender, or rear tailgate seam.
Featuring a standard 3/4" (19mm) mounting hole, this bracket is engineered to accept standard brass NMO cable mounts and heavy-duty whip bases. Its rigid steel construction prevents antenna whip sway on rough logging roads and trail rides, while the textured black finish seamlessly blends into modern truck and SUV bodywork.
🔧 NMO Base Compatibility Notice
This bracket features a standard 3/4" (19mm) circular opening designed specifically for standard drop-in NMO brass mounts, SO-239 bulkheads, and 3/4" stud bases. Please measure your hood/fender seam gap to ensure proper clearance for the 0.6" (15mm) vertical step offset.
Key Product Features
-
📐
Standard 3/4" (19mm) NMO Port: Pre-drilled center hole accommodates all standard 3/4" NMO coax cable assemblies, UHF/VHF bases, and commercial mobile antenna hardware.
-
🚘
0.6" Vertical Offset Profile: Built with a 15mm (0.6") Z-step offset to clear vehicle hood lines, fender lips, and trunk channels without pinching weather stripping.
-
🛡️
Heavy-Gauge Steel Construction: Manufactured from thick steel plate for maximum rigidity, ensuring high-gain dual-band and long whip antennas stay upright during off-road travel.
-
🎨
Textured Black Weatherproof Coating: Durable powder-coated finish protects against corrosion, rust, road salt, and harsh outdoor weather conditions.
-
⚙️
Triple-Slotted Base Mounting: Features a 3-hole base plate (1.13" / 29mm hole spacing) allowing flexible sheet metal screw or bolt attachment directly to inner body channels.
Technical Specifications & Dimensions
| Specification | Dimension / Detail |
|---|---|
| Bracket Dimensions & Hole Sizing | |
| Antenna Hole Diameter | 3/4" (19 mm) Standard NMO / Bulkhead Hole |
| Total Bracket Length | 3.95" (100 mm) |
| Mounting Base Width | 1.62" (41 mm) |
| Mounting Base Length | 1.00" (26 mm) |
| Vertical Step Offset Height | 0.60" (15 mm) |
| Base Mounting Hole Spacing | 1.13" (29 mm) Center-to-Center Outer Slots |
| Material & Equipment Compatibility | |
| Material | Heavy-Duty Formed Steel Plate |
| Finish | Textured Black Protective Powder Coat |
| Mounting Location | Vehicle Fender Seams, Hood Channels, Trunk Lips, or Custom Brackets |
| Antenna Compatibility | NMO Mounts, UHF / VHF / CB / LMR Mobile Antennas w/ 3/4" Base |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.