RM Italy

RM Italy KL300P 250W 10/12-Meter Amplifier w/ Pre-Amplifier

SKU: KL300P
This product is elligible for Ship to Fleetwood Digital for pick-up, or Canada wide shipping! Proudly processed by our Quebec warehouse.

Calculating delivery...

This is an estimate. Actual delivery times may vary.

$449.99 CAD

Vente Épuisé

Frais d'expédition calculés à l'étape de paiement.

Variantes de produits

Quantité

Why Buy?

Linear Power Amplifiers boost your radios output power. Note the rated power is a theoretical maximum, and not a realistic average output. Due to the technologies of modulation expect about half the rated power as the average or nominal output. Amplifiers require extensive knowledge to install and operate for the safest results.

Not quite sure if this is right for you? Contact Us for expert advice!

Quick Specs

24.890 - 29.700 MHz

UHF / SO239

150W AM / 300W SSB

AM
SSB

10W

Scoll down for more information about this item.

Push your QRP signal to the limit with the RM Italy KL300P. This is a high-performance 12V mobile amplifier designed for licensed Amateur Radio operators. It takes a low-power 10W radio and boosts its signal to 140W (AM/FM) or 250W (SSB), ensuring you can be heard.

More than just a transmitter, the KL300P is a complete station accessory. The "P" in its name stands for its built-in 25dB receive pre-amplifier, which can be switched on to "pull in" weak and distant stations. With automatic TX/RX switching (VOX), this compact Italian-made unit is the ultimate upgrade for any 10 or 12-Meter mobile or base station.

⚠️ CRITICAL: Maximum Input Power

This amplifier is designed for low-power QRP radios ONLY. The maximum recommended input power is:

10 Watts (AM/FM)
20 Watts (SSB)

Applying more power than this will destroy the final transistors and void the warranty. This amplifier is NOT compatible with 100-watt transceivers (like the Icom 7300 or Yaesu 891/991) or high-power 40W+ CB radios.

Warranty & Installation Notice

Please note, linear amplifiers require appropriate licensing to install and operate. These units are not designed for a 100% duty cycle. All units are fully tested and inspected before shipping; however, there are no returns and a limited (Manufacturer's) warranty applies.

RM Italy is located in Italy, and warranty claims must be processed with the manufacturer. Setup and testing should only be performed by qualified individuals.

⚡️
140W (FM) / 250W (SSB) Output: Provides a powerful signal boost for QRP radios on AM, FM, and SSB.
👂
25dB Receive Pre-Amplifier: A switchable, high-gain preamp helps you hear weak signals, dramatically improving your radio's receive performance.
📡
Wide Frequency Range (24-30 MHz): Covers the 12-Meter and 10-Meter Amateur bands, as well as the 11-Meter CB band.
🔘
Automatic TX/RX Switching (VOX): The amplifier automatically senses when you transmit and switches on, requiring no extra wiring.

Canadian Band & Licensing Information

This amplifier is designed for the 10-Meter (28-29.7 MHz) and 12-Meter (24.89-24.99 MHz) Amateur Radio bands. Operation on these frequencies requires a valid Amateur Radio Certificate issued by Innovation, Science and Economic Development Canada (ISED).

Use of this amplifier on the 11-Meter (CB) band or any other frequency outside of the Amateur bands is not permitted in Canada. Operation on the 11-Meter band is license-free but is strictly limited to 4W (AM) or 12W (SSB) of power.

Technical Specifications

Specification	Detail
Model	RM Italy KL300P
Frequency Range	24.890 - 29.700 MHz
Input Voltage	12 - 14 VDC
Max Input Current	20 Amps
Input Power	10W (AM/FM), 20W (SSB)
Output Power	140W (AM/FM), 250W (SSB)
Modes	AM / FM / SSB
Pre-Amplifier Gain	25 dB (Switchable)
Fuse	2 x 12A
Connectors	SO-239 (UHF Female)
Dimensions (L x W x H)	170 x 125 x 62 mm

Afficher tous les détails

Description