Retevis
Retevis RHD-771 High-Gain SMA-F Ham Radio Antenna (39cm)
Retevis RHD-771 High-Gain SMA-F Ham Radio Antenna (39cm)
Impossible de charger la disponibilité du service de retrait
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
Stop getting lost in the noise. The stock "rubber ducky" antenna that came with your handheld radio is a compromise. This Retevis RHD-771 High-Gain Antenna is the upgrade you need to boost your signal, extend your range, and pull in weaker stations for clearer, more reliable communication.
At approximately 39cm (15.4 inches) long, this flexible whip antenna is a significant performance upgrade over most stock antennas, giving you +2.15dB of gain. It's the easiest and most cost-effective way to get more out of your radio, whether you're hitting local repeaters or communicating simplex.
Why Upgrade Your Antenna?
- 📡Boost Your Range: The high-gain (2.15dB) and longer physical length allow you to transmit and receive signals from further away.
- 💪Flexible & Durable: Made from a flexible material that can bend and take abuse without snapping like a rigid antenna.
- 📶Dual-Band Performance: Fully optimized for both VHF (144MHz) and UHF (430MHz) amateur bands.
- ⚖️Lightweight Design: At only 34g, it adds serious performance without weighing your radio down.
Connector Check: Will This Fit My Radio?
This is the most important step! Please check your radio's antenna connector before ordering.
✔️ This Antenna (SMA-Female) FITS:
Radios with an SMA-Male connector. This is the common "Chinese style" connector where the radio itself has a center pin and outside threads (e.g., Baofeng, Retevis RA79, Ailunce H1, etc..).
❌ This Antenna does NOT fit:
Radios with an SMA-Female connector. This is the "Japanese style" connector where the radio has a center socket and inside threads (e.g., Yaesu, Icom, Kenwood).
Commonly Compatible Radios:
- Baofeng: UV-5R (all variants), UV-82, BF-F8HP, BF-888s
- Retevis: RT-5R, H-777, RT5, RT7, RT29, RT86
- Ailunce: HD1
- ...and many other radios that use an SMA-Male antenna port.
What's In The Box
- 📦1x Retevis RHD-771 SMA-F Antenna
Technical Specifications
| Model | Retevis RHD-771 |
| Connector | SMA-Female (SMA-F) |
| Band | Dual-Band (VHF / UHF) |
| Frequency (Tuned) | 144MHz / 430MHz |
| Frequency (Receive) | 136-174MHz / 400-470MHz |
| Gain | 2.15dB |
| Max Power | 20 Watts |
| V.S.W.R. | Less than 1.5 |
| Impedance | 50Ω |
| Length | ~39 cm (15.4 inches) |
| Weight | 34 g |
| Colour | Black |

Description
Stop getting lost in the noise. The stock "rubber ducky" antenna that came with your handheld radio is a compromise. This Retevis RHD-771 High-Gain Antenna is the upgrade you need to boost your signal, extend your range, and pull in weaker stations for clearer, more reliable communication.
At approximately 39cm (15.4 inches) long, this flexible whip antenna is a significant performance upgrade over most stock antennas, giving you +2.15dB of gain. It's the easiest and most cost-effective way to get more out of your radio, whether you're hitting local repeaters or communicating simplex.
Why Upgrade Your Antenna?
- 📡Boost Your Range: The high-gain (2.15dB) and longer physical length allow you to transmit and receive signals from further away.
- 💪Flexible & Durable: Made from a flexible material that can bend and take abuse without snapping like a rigid antenna.
- 📶Dual-Band Performance: Fully optimized for both VHF (144MHz) and UHF (430MHz) amateur bands.
- ⚖️Lightweight Design: At only 34g, it adds serious performance without weighing your radio down.
Connector Check: Will This Fit My Radio?
This is the most important step! Please check your radio's antenna connector before ordering.
✔️ This Antenna (SMA-Female) FITS:
Radios with an SMA-Male connector. This is the common "Chinese style" connector where the radio itself has a center pin and outside threads (e.g., Baofeng, Retevis RA79, Ailunce H1, etc..).
❌ This Antenna does NOT fit:
Radios with an SMA-Female connector. This is the "Japanese style" connector where the radio has a center socket and inside threads (e.g., Yaesu, Icom, Kenwood).
Commonly Compatible Radios:
- Baofeng: UV-5R (all variants), UV-82, BF-F8HP, BF-888s
- Retevis: RT-5R, H-777, RT5, RT7, RT29, RT86
- Ailunce: HD1
- ...and many other radios that use an SMA-Male antenna port.
What's In The Box
- 📦1x Retevis RHD-771 SMA-F Antenna
Technical Specifications
| Model | Retevis RHD-771 |
| Connector | SMA-Female (SMA-F) |
| Band | Dual-Band (VHF / UHF) |
| Frequency (Tuned) | 144MHz / 430MHz |
| Frequency (Receive) | 136-174MHz / 400-470MHz |
| Gain | 2.15dB |
| Max Power | 20 Watts |
| V.S.W.R. | Less than 1.5 |
| Impedance | 50Ω |
| Length | ~39 cm (15.4 inches) |
| Weight | 34 g |
| Colour | Black |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.