BAOFENGBFTECH
BF-TECH CA USB Programming Cable (K1 2-Pin) for Handheld Radios
BF-TECH CA USB Programming Cable (K1 2-Pin) for Handheld Radios
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
Take full control of your handheld radio programming with the BF-TECH CA USB Programming Cable (K1 2-Pin). Programming frequencies, CTCSS/DCS sub-audible tones, and repeater offsets by hand via the keypad can be tedious and prone to entry errors. This essential programming accessory bridges your radio directly to your PC, allowing you to flash complete channel lists and operating parameters in seconds.
Equipped with the widely utilized K1 2-pin interface, this cable is compatible with open-source CHIRP software as well as factory OEM Customer Programming Software (CPS). Whether you are loading local 2-Meter and 70-Centimeter repeater directories into your ham rig or organizing talk-groups for field teams, this cable provides a reliable, cost-effective PC interface.
📻 Amateur Radio Licensing Notice
This programming cable is used to configure memory channels and operating parameters on compatible two-way transceivers. An Amateur Radio Operator Certificate issued by Innovation, Science and Economic Development Canada (ISED) (or an FCC Amateur License for US operators) is required to operate transmitting equipment on amateur frequencies. Licensed operators are responsible for ensuring station operation complies with the guidelines set out in ISED RBR-4.
🔌 Hardware Interface & Driver Setup
This cable features the standard K1 2-Pin connector (3.5mm audio and 2.5mm mic pin configuration). It interfaces via a standard USB-to-UART bridge. For automatic driver detection on all modern operating systems without manual driver management, operators may also consider our premium FTDI PC01 or PC03 series cables.
📦 Direct Warehouse Dispatch
All BF-TECH CA products ship direct from the BF-TECH CA distribution facility in Ontario. Orders are processed rapidly for reliable domestic carrier delivery anywhere across Canada with zero border delays or import brokerage fees.
Key Product Features
-
⚡
Rapid Codeplug Management: Read, write, edit, and back up memory channel rosters, power settings, repeater offsets, and squelch parameters from your PC to save hours of manual keypad input.
-
📝
CHIRP & Factory CPS Support: Fully compatible with free, community-standard CHIRP and CHIRP-next software, as well as manufacturer OEM Customer Programming Software suites.
-
📻
Industry-Standard K1 2-Pin Port: Features standard Kenwood-style 2-pin spacing (3.5mm stereo and 2.5mm stereo plugs spaced 11.5mm apart) for universal fit across dozens of radio models.
-
💻
Universal USB Type-A Plug: Connects directly into standard USB 2.0 or USB 3.0 ports on Windows desktop workstations, laptops, or portable field programming PCs.
-
🛡️
Durable Molded Strain Relief: Constructed with high-quality copper core wiring, durable outer PVC shielding, and flexible molded strain relief boots to protect internal wire joints.
What's Included
| Component | Description |
|---|---|
| Programming Cable | 1x BF-TECH CA USB-to-K1 2-Pin Radio Programming Cable |
Radio Hardware Compatibility
| Brand / Lineup | Compatible Transceiver Models |
|---|---|
| BF-TECH CA | BF-F8RT, UV-5R, UV-82RT, BF-F5XT, BF-F5XP, BF-F8, BF-F8X3 |
| Baofeng / Pofung | UV-5R (all sub-models: 5RA, 5RE, Plus, V2+), BF-888S, UV-82 series, BF-F8HP, UV-5X3, GT-3 |
| Kenwood | TK-208, TK-220, TK-240, TK-250, TK-260, TK-270, TK-320, TK-340, TH-D7, TH-F6, TH-K2 |
| Other K1 Radios | Compatible with most AnyTone, Retevis, and TYT handhelds using standard K1 2-pin audio ports |
Technical Specifications
| Specification | Detail |
|---|---|
| Hardware Architecture & Interfaces | |
| Brand & Lineup | BF-TECH CA |
| Cable Type | USB to Serial Handheld Radio Programming Cable |
| Host Computer Interface | Standard USB Type-A (USB 2.0 / USB 3.0 Compatible) |
| Radio Side Connector | Standard K1 2-Pin (3.5mm Ear / 2.5mm Mic, 11.5mm Spacing) |
| Cable Length | Approx. 3.3 Feet (1.0 Meter) |
| Cable Material | Shielded PVC Jacketing with Copper Conductors |
| Software & Regulatory Standards | |
| Supported Operating Systems | Windows 11, Windows 10, Windows 8/7, Linux |
| Supported Programming Suites | CHIRP, CHIRP-next, Manufacturer OEM CPS |
| Target Amateur Frequency Range | ITU Region 2 (144–148 MHz VHF and 430–450 MHz UHF) |
| Operator Regulatory Responsibility | Licensed operators are responsible for operation under ISED RBR-4 guidelines |
| Fulfillment Location | Ships Direct from BF-TECH CA in Ontario, Canada |
Description
Take full control of your handheld radio programming with the BF-TECH CA USB Programming Cable (K1 2-Pin). Programming frequencies, CTCSS/DCS sub-audible tones, and repeater offsets by hand via the keypad can be tedious and prone to entry errors. This essential programming accessory bridges your radio directly to your PC, allowing you to flash complete channel lists and operating parameters in seconds.
Equipped with the widely utilized K1 2-pin interface, this cable is compatible with open-source CHIRP software as well as factory OEM Customer Programming Software (CPS). Whether you are loading local 2-Meter and 70-Centimeter repeater directories into your ham rig or organizing talk-groups for field teams, this cable provides a reliable, cost-effective PC interface.
📻 Amateur Radio Licensing Notice
This programming cable is used to configure memory channels and operating parameters on compatible two-way transceivers. An Amateur Radio Operator Certificate issued by Innovation, Science and Economic Development Canada (ISED) (or an FCC Amateur License for US operators) is required to operate transmitting equipment on amateur frequencies. Licensed operators are responsible for ensuring station operation complies with the guidelines set out in ISED RBR-4.
🔌 Hardware Interface & Driver Setup
This cable features the standard K1 2-Pin connector (3.5mm audio and 2.5mm mic pin configuration). It interfaces via a standard USB-to-UART bridge. For automatic driver detection on all modern operating systems without manual driver management, operators may also consider our premium FTDI PC01 or PC03 series cables.
📦 Direct Warehouse Dispatch
All BF-TECH CA products ship direct from the BF-TECH CA distribution facility in Ontario. Orders are processed rapidly for reliable domestic carrier delivery anywhere across Canada with zero border delays or import brokerage fees.
Key Product Features
-
⚡
Rapid Codeplug Management: Read, write, edit, and back up memory channel rosters, power settings, repeater offsets, and squelch parameters from your PC to save hours of manual keypad input.
-
📝
CHIRP & Factory CPS Support: Fully compatible with free, community-standard CHIRP and CHIRP-next software, as well as manufacturer OEM Customer Programming Software suites.
-
📻
Industry-Standard K1 2-Pin Port: Features standard Kenwood-style 2-pin spacing (3.5mm stereo and 2.5mm stereo plugs spaced 11.5mm apart) for universal fit across dozens of radio models.
-
💻
Universal USB Type-A Plug: Connects directly into standard USB 2.0 or USB 3.0 ports on Windows desktop workstations, laptops, or portable field programming PCs.
-
🛡️
Durable Molded Strain Relief: Constructed with high-quality copper core wiring, durable outer PVC shielding, and flexible molded strain relief boots to protect internal wire joints.
What's Included
| Component | Description |
|---|---|
| Programming Cable | 1x BF-TECH CA USB-to-K1 2-Pin Radio Programming Cable |
Radio Hardware Compatibility
| Brand / Lineup | Compatible Transceiver Models |
|---|---|
| BF-TECH CA | BF-F8RT, UV-5R, UV-82RT, BF-F5XT, BF-F5XP, BF-F8, BF-F8X3 |
| Baofeng / Pofung | UV-5R (all sub-models: 5RA, 5RE, Plus, V2+), BF-888S, UV-82 series, BF-F8HP, UV-5X3, GT-3 |
| Kenwood | TK-208, TK-220, TK-240, TK-250, TK-260, TK-270, TK-320, TK-340, TH-D7, TH-F6, TH-K2 |
| Other K1 Radios | Compatible with most AnyTone, Retevis, and TYT handhelds using standard K1 2-pin audio ports |
Technical Specifications
| Specification | Detail |
|---|---|
| Hardware Architecture & Interfaces | |
| Brand & Lineup | BF-TECH CA |
| Cable Type | USB to Serial Handheld Radio Programming Cable |
| Host Computer Interface | Standard USB Type-A (USB 2.0 / USB 3.0 Compatible) |
| Radio Side Connector | Standard K1 2-Pin (3.5mm Ear / 2.5mm Mic, 11.5mm Spacing) |
| Cable Length | Approx. 3.3 Feet (1.0 Meter) |
| Cable Material | Shielded PVC Jacketing with Copper Conductors |
| Software & Regulatory Standards | |
| Supported Operating Systems | Windows 11, Windows 10, Windows 8/7, Linux |
| Supported Programming Suites | CHIRP, CHIRP-next, Manufacturer OEM CPS |
| Target Amateur Frequency Range | ITU Region 2 (144–148 MHz VHF and 430–450 MHz UHF) |
| Operator Regulatory Responsibility | Licensed operators are responsible for operation under ISED RBR-4 guidelines |
| Fulfillment Location | Ships Direct from BF-TECH CA in Ontario, Canada |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.