Distribucomm
DistribuComm 3ft RG213 Heavy-Duty Low-Loss Patch Cable (PL-259)
DistribuComm 3ft RG213 Heavy-Duty Low-Loss Patch Cable (PL-259)
HURRY! Selling out fast! Only 3 left in stock!
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Estimated Available December 1st
Scoll down for more information about this item.
When performance matters, step up to the DistribuComm RG213. This is the "heavyweight" champion of patch cables. Unlike thin RG58 jumpers, this 3-foot (91 cm) cable is made from thick (0.405") RG213 coaxial cable, offering significantly lower signal loss and much higher power handling capability.
It is the ideal choice for connecting high-power HF transceivers, linear amplifiers, and precision antenna tuners in your base station. If you are running more than 100 watts, or simply want the cleanest possible signal path between your radio and SWR meter, this is the cable you need.
🛡️ Why Choose RG213?
RG213 is the standard for high-performance amateur radio stations. It features a thick center conductor and 95% bare copper braid shielding.
This superior construction handles higher power levels (kW+) with ease and provides excellent shielding against RF interference in your shack.
-
📉
Low-Loss Performance: Thick dielectric and conductor geometry result in less signal loss than standard RG58/RG8x cables.
-
⚡️
High Power Handling: Designed to handle high-power output from linear amplifiers without heating up or breaking down.
-
🔌
Heavy-Duty PL-259 Connectors: Features robust, high-quality UHF-Male plugs soldered for maximum conductivity and strength.
-
📏
3-Foot Jumper Length: The perfect length for interconnecting stacked equipment (Amp to Tuner, Radio to Meter) on your operating desk.
Technical Specifications
| Specification | Detail |
|---|---|
| Cable Type | RG213 Coaxial (0.405" OD) |
| Shielding | 95% Bare Copper Braid |
| Length | 3 Feet (approx. 91 cm) |
| Connector A | PL-259 (UHF-Male) |
| Connector B | PL-259 (UHF-Male) |
| Impedance | 50 Ohm |
| Application | Amplifiers, High-Power Base Stations |
Description
When performance matters, step up to the DistribuComm RG213. This is the "heavyweight" champion of patch cables. Unlike thin RG58 jumpers, this 3-foot (91 cm) cable is made from thick (0.405") RG213 coaxial cable, offering significantly lower signal loss and much higher power handling capability.
It is the ideal choice for connecting high-power HF transceivers, linear amplifiers, and precision antenna tuners in your base station. If you are running more than 100 watts, or simply want the cleanest possible signal path between your radio and SWR meter, this is the cable you need.
🛡️ Why Choose RG213?
RG213 is the standard for high-performance amateur radio stations. It features a thick center conductor and 95% bare copper braid shielding.
This superior construction handles higher power levels (kW+) with ease and provides excellent shielding against RF interference in your shack.
-
📉
Low-Loss Performance: Thick dielectric and conductor geometry result in less signal loss than standard RG58/RG8x cables.
-
⚡️
High Power Handling: Designed to handle high-power output from linear amplifiers without heating up or breaking down.
-
🔌
Heavy-Duty PL-259 Connectors: Features robust, high-quality UHF-Male plugs soldered for maximum conductivity and strength.
-
📏
3-Foot Jumper Length: The perfect length for interconnecting stacked equipment (Amp to Tuner, Radio to Meter) on your operating desk.
Technical Specifications
| Specification | Detail |
|---|---|
| Cable Type | RG213 Coaxial (0.405" OD) |
| Shielding | 95% Bare Copper Braid |
| Length | 3 Feet (approx. 91 cm) |
| Connector A | PL-259 (UHF-Male) |
| Connector B | PL-259 (UHF-Male) |
| Impedance | 50 Ohm |
| Application | Amplifiers, High-Power Base Stations |
Estimated Available December 1st
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.