Retevis
Retevis EHK008 Motorcycle & Powersports Helmet Headset (Kenwood 2-Pin)
Retevis EHK008 Motorcycle & Powersports Helmet Headset (Kenwood 2-Pin)
HURRY! Selling out fast! Only 2 left in stock!
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
Stay Connected on the Open Road.
Whether you are tearing up the trails on an ATV, cruising the highway on your motorcycle, or navigating backcountry powder on a snowmobile, reliable group communication is a must. The Retevis EHK008 Motorcycle Helmet Headset is a rugged, purpose-built comms solution designed specifically for riders wearing full-face helmets.
This headset completely eliminates the danger of taking your hands off the controls to grab your radio. It features a dedicated finger PTT button that mounts directly to your handlebars, allowing you to transmit instantly while maintaining full control of your vehicle. Dual flat-panel speakers tuck neatly into your helmet's ear wells, delivering loud and clear audio over the roar of your engine.
-
🏍️
Handlebar Finger PTT: Features a dedicated push-to-talk button with a hook and loop wrap that mounts securely to your steering controls or handlebars for safe, hands-on-the-bars transmitting.
-
🔊
Dual High-Volume Speakers: Two slim-profile 36mm speakers install easily inside the helmet lining, providing maximum clarity and volume to overcome wind and exhaust noise.
-
🎙️
Helmet-Mounted Mic: The discrete boomless microphone adheres directly to the inside chin bar of your full-face helmet, shielding it from direct wind interference.
-
🔌
Quick Disconnect: The main wiring harness allows you to easily unplug the helmet portion from the radio and PTT setup when stepping off your bike.
💡 Connector & Fitment Check
Helmet Fit: This headset is specifically tailored for Full-Face Helmets. It may not mount properly in open-face, modular, or half-helmets.
Radio Fit: Uses the standard Kenwood 2-Pin (K-Type) plug. It is fully compatible with Baofeng handhelds (UV-5R, UV-82, 888S), standard 2-pin Retevis models, Quansheng UV-K5, and AnyTone. It will not fit multi-pin waterproof radios like the HD1 or HD2.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | Retevis EHK008 |
| Connector Type | Kenwood 2-Pin (3.5mm/2.5mm) |
| Helmet Style | Full-Face (Closed Chin Bar) |
| Speakers | Dual 36mm Elements (1W Output) |
| Microphone | Internal Helmet Mount (-38dB Sensitivity) |
| PTT Configuration | Handlebar Finger PTT |
| Weight | 160g |
📦 What's In The Box
- 1x Retevis EHK008 Helmet Headset System
- 1x Hook and Loop Handlebar Finger PTT
- Adhesive Mounting Pads for Speakers and Mic
Description
Stay Connected on the Open Road.
Whether you are tearing up the trails on an ATV, cruising the highway on your motorcycle, or navigating backcountry powder on a snowmobile, reliable group communication is a must. The Retevis EHK008 Motorcycle Helmet Headset is a rugged, purpose-built comms solution designed specifically for riders wearing full-face helmets.
This headset completely eliminates the danger of taking your hands off the controls to grab your radio. It features a dedicated finger PTT button that mounts directly to your handlebars, allowing you to transmit instantly while maintaining full control of your vehicle. Dual flat-panel speakers tuck neatly into your helmet's ear wells, delivering loud and clear audio over the roar of your engine.
-
🏍️
Handlebar Finger PTT: Features a dedicated push-to-talk button with a hook and loop wrap that mounts securely to your steering controls or handlebars for safe, hands-on-the-bars transmitting.
-
🔊
Dual High-Volume Speakers: Two slim-profile 36mm speakers install easily inside the helmet lining, providing maximum clarity and volume to overcome wind and exhaust noise.
-
🎙️
Helmet-Mounted Mic: The discrete boomless microphone adheres directly to the inside chin bar of your full-face helmet, shielding it from direct wind interference.
-
🔌
Quick Disconnect: The main wiring harness allows you to easily unplug the helmet portion from the radio and PTT setup when stepping off your bike.
💡 Connector & Fitment Check
Helmet Fit: This headset is specifically tailored for Full-Face Helmets. It may not mount properly in open-face, modular, or half-helmets.
Radio Fit: Uses the standard Kenwood 2-Pin (K-Type) plug. It is fully compatible with Baofeng handhelds (UV-5R, UV-82, 888S), standard 2-pin Retevis models, Quansheng UV-K5, and AnyTone. It will not fit multi-pin waterproof radios like the HD1 or HD2.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | Retevis EHK008 |
| Connector Type | Kenwood 2-Pin (3.5mm/2.5mm) |
| Helmet Style | Full-Face (Closed Chin Bar) |
| Speakers | Dual 36mm Elements (1W Output) |
| Microphone | Internal Helmet Mount (-38dB Sensitivity) |
| PTT Configuration | Handlebar Finger PTT |
| Weight | 160g |
📦 What's In The Box
- 1x Retevis EHK008 Helmet Headset System
- 1x Hook and Loop Handlebar Finger PTT
- Adhesive Mounting Pads for Speakers and Mic
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.