Workman Electronics
Workman Electronics FH5 20 AWG Inline Fuse Holder with 2A Fuse
Workman Electronics FH5 20 AWG Inline Fuse Holder with 2A Fuse
HURRY! Selling out fast! Only 4 left in stock!
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
Protect your valuable radio equipment and custom 12V DC electronics from overcurrent damage with the Workman Electronics FH5 Inline Fuse Holder. There is nothing worse than a wiring short ruining an expensive transceiver or mobile accessory—installing a proper inline fuse is the easiest and most reliable way to safeguard your gear.
The FH5 features a durable molded body with pre-installed 20 AWG copper wire leads and includes a 2 Amp fast-acting glass cartridge fuse. Whether replacing a damaged fuse holder in a CB power lead, wiring up a police scanner, or adding dedicated circuit protection to low-current vehicle accessories, the FH5 delivers dependable performance right out of the package.
⚡ Current Rating & Wiring Notice
This fuse holder is wired with 20 AWG lead wire and is supplied with a 2 Amp glass fuse. It is designed for low-current applications (up to 2–5A max continuous) such as CB power cords, memory retention wires, dash cameras, and receiver accessories. For 50W+ mobile VHF/UHF transceivers requiring 10A–20A, please use heavy-gauge 12/10 AWG ATC blade fuse harnesses.
Key Product Features
-
🛡️
Reliable Overcurrent Protection: Safeguards sensitive communication hardware against accidental short circuits, voltage spikes, and wiring faults.
-
🔌
Includes 2A Glass Cartridge Fuse: Pre-loaded with a standard fast-blow glass fuse, making it instantly ready to wire inline into low-drain DC power runs.
-
✂️
Cut-to-Length Wire Loop Design: Supplied with an approximately 6-inch continuous 20 AWG wire loop that cuts into two tailored leads for easy butt-splicing or soldering.
-
🔒
Twist-Lock Protective Shell: Spring-tensioned molded housing keeps internal electrical contacts seated firmly under vehicle vibration while allowing quick, tool-free fuse inspection and replacement.
-
📻
Universal 12V Radio Compatibility: Direct factory replacement for worn or brittle fuse holders on Uniden, Cobra, President, and Midland CB radio power cords, scanner harnesses, and LED accessories.
Technical Specifications
| Specification | Detail |
|---|---|
| Electrical & Circuit Parameters | |
| Model Number | Workman FH5 (FH-5) |
| Included Fuse Rating | 2 Amp Fast-Acting Glass Cartridge Fuse |
| Compatible Fuse Styles | Standard Glass Fuses (AGC / 1AG / 2AG Series) |
| Voltage Rating | 12V – 32V DC |
| Wire Gauge | 20 AWG Copper Conductor |
| Mechanical & Physical Parameters | |
| Overall Lead Length | Approximately 6 Inches (~15 cm) Loop |
| Housing Construction | Molded Insulated Polymer w/ Spring-Tensioned Contacts |
| Connection Style | Inline Solder / Crimp Splice |
| Primary Applications | CB Radio Power Cords, Scanners, Low-Current 12V DC Accessories, LED Lines |
Description
Protect your valuable radio equipment and custom 12V DC electronics from overcurrent damage with the Workman Electronics FH5 Inline Fuse Holder. There is nothing worse than a wiring short ruining an expensive transceiver or mobile accessory—installing a proper inline fuse is the easiest and most reliable way to safeguard your gear.
The FH5 features a durable molded body with pre-installed 20 AWG copper wire leads and includes a 2 Amp fast-acting glass cartridge fuse. Whether replacing a damaged fuse holder in a CB power lead, wiring up a police scanner, or adding dedicated circuit protection to low-current vehicle accessories, the FH5 delivers dependable performance right out of the package.
⚡ Current Rating & Wiring Notice
This fuse holder is wired with 20 AWG lead wire and is supplied with a 2 Amp glass fuse. It is designed for low-current applications (up to 2–5A max continuous) such as CB power cords, memory retention wires, dash cameras, and receiver accessories. For 50W+ mobile VHF/UHF transceivers requiring 10A–20A, please use heavy-gauge 12/10 AWG ATC blade fuse harnesses.
Key Product Features
-
🛡️
Reliable Overcurrent Protection: Safeguards sensitive communication hardware against accidental short circuits, voltage spikes, and wiring faults.
-
🔌
Includes 2A Glass Cartridge Fuse: Pre-loaded with a standard fast-blow glass fuse, making it instantly ready to wire inline into low-drain DC power runs.
-
✂️
Cut-to-Length Wire Loop Design: Supplied with an approximately 6-inch continuous 20 AWG wire loop that cuts into two tailored leads for easy butt-splicing or soldering.
-
🔒
Twist-Lock Protective Shell: Spring-tensioned molded housing keeps internal electrical contacts seated firmly under vehicle vibration while allowing quick, tool-free fuse inspection and replacement.
-
📻
Universal 12V Radio Compatibility: Direct factory replacement for worn or brittle fuse holders on Uniden, Cobra, President, and Midland CB radio power cords, scanner harnesses, and LED accessories.
Technical Specifications
| Specification | Detail |
|---|---|
| Electrical & Circuit Parameters | |
| Model Number | Workman FH5 (FH-5) |
| Included Fuse Rating | 2 Amp Fast-Acting Glass Cartridge Fuse |
| Compatible Fuse Styles | Standard Glass Fuses (AGC / 1AG / 2AG Series) |
| Voltage Rating | 12V – 32V DC |
| Wire Gauge | 20 AWG Copper Conductor |
| Mechanical & Physical Parameters | |
| Overall Lead Length | Approximately 6 Inches (~15 cm) Loop |
| Housing Construction | Molded Insulated Polymer w/ Spring-Tensioned Contacts |
| Connection Style | Inline Solder / Crimp Splice |
| Primary Applications | CB Radio Power Cords, Scanners, Low-Current 12V DC Accessories, LED Lines |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.