BAOFENGBFTECH
BF-TECH CA USB Programming Cable for QYT KT-8900 & KT-8900R Series Mobile Radios
BF-TECH CA USB Programming Cable for QYT KT-8900 & KT-8900R Series Mobile Radios
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
Program and manage memory channels on your mini mobile transceiver with the BF-TECH CA USB Programming Cable for QYT KT-8900 Series Mobile Radios. Entering frequencies, repeater offsets, and CTCSS/DCS sub-audible tones by hand via a microphone keypad can be tedious and prone to manual input errors. This dedicated interface cable establishes a stable serial bridge between your PC and transceiver, allowing you to flash complete 200-channel codeplugs in seconds.
Designed specifically for QYT-architecture mini mobile rigs, this cable connects directly into the radio's dedicated 3.5mm programming port. Fully supported by the popular open-source CHIRP software suite as well as factory OEM Customer Programming Software (CPS), it streamlines channel organization, power level settings, and squelch parameters for cross-country road trips, amateur club nets, and field deployments.
📻 Amateur Radio Licensing Notice
This programming cable is used to configure memory channels and operating parameters on compatible two-way transceivers. An Amateur Radio Operator Certificate issued by Innovation, Science and Economic Development Canada (ISED) (or an FCC Amateur License for US operators) is required to operate transmitting equipment on amateur frequencies. Licensed operators are responsible for ensuring station operation complies with the guidelines set out in ISED RBR-4.
🔌 Dedicated 3.5mm Mobile Data Interface
This cable features a dedicated 3.5mm serial data plug designed specifically for the programming port on mini mobile transceivers, including the QYT KT-8900, KT-8900R, KT-7900D, KT-UV980, and KT-980 Plus. Note: This cable does not use a 2-pin K1 connector and will not fit handheld radios such as the UV-5R or UV-82 series.
📦 Direct Warehouse Dispatch
All BF-TECH CA products ship direct from the BF-TECH CA distribution facility in Ontario. Orders are processed rapidly for reliable domestic carrier delivery anywhere across Canada with zero border delays or import brokerage fees.
Key Product Features
-
⚡
Rapid Codeplug Management: Quickly write, edit, back up, and organize all 200 memory channels, frequency splits, and alphanumeric channel names directly from your computer.
-
💻
CHIRP & Factory CPS Compatibility: Fully supported by open-source CHIRP and CHIRP-next utilities for easy repeater directory importing, as well as factory QYT programming software.
-
🔌
Dedicated 3.5mm Serial Connection: Precision-molded 3.5mm plug seats firmly into the transceiver data jack to ensure uninterrupted communication and prevent data corruption during read/write cycles.
-
🖥️
Universal USB Type-A Interface: Plugs directly into any standard USB 2.0 or USB 3.0 port on Windows desktop PCs, workshop workstations, or field programming laptops.
-
🛡️
Durable Shielded Construction: Constructed with high-grade copper core wiring, durable outer PVC shielding, and molded strain relief boots to protect against wire fatigue and shop wear.
What's Included
| Component | Description |
|---|---|
| Programming Cable | 1x BF-TECH CA USB to 3.5mm Mini Mobile Radio Programming Cable |
Radio Hardware Compatibility
| Brand / Platform | Compatible Mobile Transceiver Models |
|---|---|
| QYT Series | KT-8900, KT-8900R, KT-7900D, KT-UV980, KT-980 Plus |
| BF-TECH CA Lineup | QYT KT-8900 25W Dual-Band Mini Mobile Amateur Radio |
| Compatible OEM Clones | Compatible with mobile transceivers utilizing the QYT 3.5mm programming port architecture (e.g., Radioddity QB25 series) |
Technical Specifications
| Specification | Detail |
|---|---|
| Hardware Architecture & Interfaces | |
| Brand & Lineup | BF-TECH CA |
| Cable Type | USB-to-Serial Mini Mobile Transceiver Programming Cable |
| Host Computer Interface | Standard USB Type-A (USB 2.0 / USB 3.0 Compatible) |
| Radio Interface Plug | 3.5mm Serial Data Male Plug |
| Cable Length | Approx. 3.3 Feet (1.0 Meter) |
| Cable Material | Heavy-Duty Flexible PVC Jacketing with Copper Conductors |
| Software & Regulatory Standards | |
| Supported Operating Systems | Windows 11, Windows 10, Windows 8/7, Linux |
| Supported Programming Suites | CHIRP, CHIRP-next, QYT OEM Factory CPS |
| Target Amateur Frequency Range | ITU Region 2 (144–148 MHz VHF and 430–450 MHz UHF) |
| Operator Regulatory Responsibility | Licensed operators are responsible for operation under ISED RBR-4 guidelines |
| Fulfillment Location | Ships Direct from BF-TECH CA in Ontario, Canada |
Description
Program and manage memory channels on your mini mobile transceiver with the BF-TECH CA USB Programming Cable for QYT KT-8900 Series Mobile Radios. Entering frequencies, repeater offsets, and CTCSS/DCS sub-audible tones by hand via a microphone keypad can be tedious and prone to manual input errors. This dedicated interface cable establishes a stable serial bridge between your PC and transceiver, allowing you to flash complete 200-channel codeplugs in seconds.
Designed specifically for QYT-architecture mini mobile rigs, this cable connects directly into the radio's dedicated 3.5mm programming port. Fully supported by the popular open-source CHIRP software suite as well as factory OEM Customer Programming Software (CPS), it streamlines channel organization, power level settings, and squelch parameters for cross-country road trips, amateur club nets, and field deployments.
📻 Amateur Radio Licensing Notice
This programming cable is used to configure memory channels and operating parameters on compatible two-way transceivers. An Amateur Radio Operator Certificate issued by Innovation, Science and Economic Development Canada (ISED) (or an FCC Amateur License for US operators) is required to operate transmitting equipment on amateur frequencies. Licensed operators are responsible for ensuring station operation complies with the guidelines set out in ISED RBR-4.
🔌 Dedicated 3.5mm Mobile Data Interface
This cable features a dedicated 3.5mm serial data plug designed specifically for the programming port on mini mobile transceivers, including the QYT KT-8900, KT-8900R, KT-7900D, KT-UV980, and KT-980 Plus. Note: This cable does not use a 2-pin K1 connector and will not fit handheld radios such as the UV-5R or UV-82 series.
📦 Direct Warehouse Dispatch
All BF-TECH CA products ship direct from the BF-TECH CA distribution facility in Ontario. Orders are processed rapidly for reliable domestic carrier delivery anywhere across Canada with zero border delays or import brokerage fees.
Key Product Features
-
⚡
Rapid Codeplug Management: Quickly write, edit, back up, and organize all 200 memory channels, frequency splits, and alphanumeric channel names directly from your computer.
-
💻
CHIRP & Factory CPS Compatibility: Fully supported by open-source CHIRP and CHIRP-next utilities for easy repeater directory importing, as well as factory QYT programming software.
-
🔌
Dedicated 3.5mm Serial Connection: Precision-molded 3.5mm plug seats firmly into the transceiver data jack to ensure uninterrupted communication and prevent data corruption during read/write cycles.
-
🖥️
Universal USB Type-A Interface: Plugs directly into any standard USB 2.0 or USB 3.0 port on Windows desktop PCs, workshop workstations, or field programming laptops.
-
🛡️
Durable Shielded Construction: Constructed with high-grade copper core wiring, durable outer PVC shielding, and molded strain relief boots to protect against wire fatigue and shop wear.
What's Included
| Component | Description |
|---|---|
| Programming Cable | 1x BF-TECH CA USB to 3.5mm Mini Mobile Radio Programming Cable |
Radio Hardware Compatibility
| Brand / Platform | Compatible Mobile Transceiver Models |
|---|---|
| QYT Series | KT-8900, KT-8900R, KT-7900D, KT-UV980, KT-980 Plus |
| BF-TECH CA Lineup | QYT KT-8900 25W Dual-Band Mini Mobile Amateur Radio |
| Compatible OEM Clones | Compatible with mobile transceivers utilizing the QYT 3.5mm programming port architecture (e.g., Radioddity QB25 series) |
Technical Specifications
| Specification | Detail |
|---|---|
| Hardware Architecture & Interfaces | |
| Brand & Lineup | BF-TECH CA |
| Cable Type | USB-to-Serial Mini Mobile Transceiver Programming Cable |
| Host Computer Interface | Standard USB Type-A (USB 2.0 / USB 3.0 Compatible) |
| Radio Interface Plug | 3.5mm Serial Data Male Plug |
| Cable Length | Approx. 3.3 Feet (1.0 Meter) |
| Cable Material | Heavy-Duty Flexible PVC Jacketing with Copper Conductors |
| Software & Regulatory Standards | |
| Supported Operating Systems | Windows 11, Windows 10, Windows 8/7, Linux |
| Supported Programming Suites | CHIRP, CHIRP-next, QYT OEM Factory CPS |
| Target Amateur Frequency Range | ITU Region 2 (144–148 MHz VHF and 430–450 MHz UHF) |
| Operator Regulatory Responsibility | Licensed operators are responsible for operation under ISED RBR-4 guidelines |
| Fulfillment Location | Ships Direct from BF-TECH CA in Ontario, Canada |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.