Fleetwood Digital
BNC-Male to SMA-Female Antenna Adapter (for Scanners & HTs)
BNC-Male to SMA-Female Antenna Adapter (for Scanners & HTs)
HURRY! Selling out fast! Only 2 left in stock!
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
This high-quality adapter lets you use modern, high-gain SMA antennas on your scanner or older handheld radio. It connects any device with a BNC-Female port to an antenna that uses an SMA-Male plug.
This is the perfect way to upgrade the antenna on your Uniden scanner or older Icom HT to a modern, high-performance antenna (like a Signal Stick or Yaesu antenna) that has an SMA-Male (pin) connector.
💡 Please Note: Sold as a Single Adapter
The main product image shows two adapters from different angles so you can see both connectors. This item is sold as a single (1) adapter.
-
🔌
Connector 1: BNC-Male (Device Side): Features a center pin with the "bayonet" twist-lock mechanism. Plugs into your scanner or radio.
-
📡
Connector 2: SMA-Female (Antenna Side): Features a center hole and threads on the *outside*. Accepts an SMA-Male antenna (like one for a Yaesu FT-60R).
-
🛰️
Upgrade Your Scanner or HT: Opens up a massive ecosystem of high-gain SMA-Male antennas for your BNC-equipped device.
✅ Compatibility Check
This adapter allows a device with a BNC-Female port to use an antenna with an SMA-Male plug.
- DEVICES This Fits: Most Uniden, Whistler, and GRE handheld scanners, older Icom HTs (e.g., IC-V86), and test equipment.
- ANTENNAS This Fits: Yaesu, Icom, Signal Stick, and Retevis RT85/RA89 antennas (any SMA antenna with a center pin).
⚠️ Does NOT Fit Baofeng Antennas
This adapter does NOT accept antennas designed for a Baofeng UV-5R or Quansheng UV-K5 (those antennas are SMA-Female and have a center hole).
Technical Specifications
| Specification | Detail |
|---|---|
| Connector 1 (Device Side) | BNC-Male (Center Pin, Twist-Lock) |
| Connector 2 (Antenna Side) | SMA-Female (Center hole, threads outside) |
| Impedance | 50 Ohm |
| Material | Nickel-plated brass |
Description
This high-quality adapter lets you use modern, high-gain SMA antennas on your scanner or older handheld radio. It connects any device with a BNC-Female port to an antenna that uses an SMA-Male plug.
This is the perfect way to upgrade the antenna on your Uniden scanner or older Icom HT to a modern, high-performance antenna (like a Signal Stick or Yaesu antenna) that has an SMA-Male (pin) connector.
💡 Please Note: Sold as a Single Adapter
The main product image shows two adapters from different angles so you can see both connectors. This item is sold as a single (1) adapter.
-
🔌
Connector 1: BNC-Male (Device Side): Features a center pin with the "bayonet" twist-lock mechanism. Plugs into your scanner or radio.
-
📡
Connector 2: SMA-Female (Antenna Side): Features a center hole and threads on the *outside*. Accepts an SMA-Male antenna (like one for a Yaesu FT-60R).
-
🛰️
Upgrade Your Scanner or HT: Opens up a massive ecosystem of high-gain SMA-Male antennas for your BNC-equipped device.
✅ Compatibility Check
This adapter allows a device with a BNC-Female port to use an antenna with an SMA-Male plug.
- DEVICES This Fits: Most Uniden, Whistler, and GRE handheld scanners, older Icom HTs (e.g., IC-V86), and test equipment.
- ANTENNAS This Fits: Yaesu, Icom, Signal Stick, and Retevis RT85/RA89 antennas (any SMA antenna with a center pin).
⚠️ Does NOT Fit Baofeng Antennas
This adapter does NOT accept antennas designed for a Baofeng UV-5R or Quansheng UV-K5 (those antennas are SMA-Female and have a center hole).
Technical Specifications
| Specification | Detail |
|---|---|
| Connector 1 (Device Side) | BNC-Male (Center Pin, Twist-Lock) |
| Connector 2 (Antenna Side) | SMA-Female (Center hole, threads outside) |
| Impedance | 50 Ohm |
| Material | Nickel-plated brass |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.