Distribucomm
DistribuComm 50ft RG58 PL-259 Antenna Coax Cable (95% Shielded)
DistribuComm 50ft RG58 PL-259 Antenna Coax Cable (95% Shielded)
HURRY! Selling out fast! Only 2 left in stock!
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Available After November 28th
Scoll down for more information about this item.
Run your antenna where you need it with this high-quality 50-foot (15.2 meter) RG58 coaxial cable. It comes pre-terminated with heavy-duty molded PL-259 (UHF-Male) connectors on both ends, ready to connect your radio to a base station or mobile antenna.
This cable is built with 95% copper shielding, making it a significant upgrade over standard generic coax. It is flexible enough for easy routing through walls or vehicles while providing the durability needed for permanent installations.
🛡️ Why 95% Shielding Matters
Cheap cables often use as little as 60% braid coverage, which allows RF interference to leak in and out. This cable uses 95% copper braid shielding.
This premium shielding helps keep your signal inside the cable and significantly reduces (though does not completely eliminate) RF interference and noise in your shack.
-
📏
50-Foot Length: A generous 15.2-meter run, perfect for reaching from your desk to a roof-mounted or attic antenna.
-
🔌
PL-259 Connectors: Standard UHF-Male plugs on both ends fit almost all mobile radios, SWR meters, and antenna mounts.
-
💪
Durable Strain Relief: Molded boots on both connectors protect the cable from bending stress and ensure a reliable connection.
-
📡
Flexible RG58 Coax: Standard 50-ohm coax that is easy to route around corners and through tight spaces.
Technical Specifications
| Specification | Detail |
|---|---|
| Cable Type | RG58 Coaxial |
| Shielding | 95% Copper Braid |
| Length | 50 Feet (approx. 15.2 m) |
| Connector A | PL-259 (UHF-Male) |
| Connector B | PL-259 (UHF-Male) |
| Impedance | 50 Ohm |
| Application | Base station or mobile antenna runs |
Description
Run your antenna where you need it with this high-quality 50-foot (15.2 meter) RG58 coaxial cable. It comes pre-terminated with heavy-duty molded PL-259 (UHF-Male) connectors on both ends, ready to connect your radio to a base station or mobile antenna.
This cable is built with 95% copper shielding, making it a significant upgrade over standard generic coax. It is flexible enough for easy routing through walls or vehicles while providing the durability needed for permanent installations.
🛡️ Why 95% Shielding Matters
Cheap cables often use as little as 60% braid coverage, which allows RF interference to leak in and out. This cable uses 95% copper braid shielding.
This premium shielding helps keep your signal inside the cable and significantly reduces (though does not completely eliminate) RF interference and noise in your shack.
-
📏
50-Foot Length: A generous 15.2-meter run, perfect for reaching from your desk to a roof-mounted or attic antenna.
-
🔌
PL-259 Connectors: Standard UHF-Male plugs on both ends fit almost all mobile radios, SWR meters, and antenna mounts.
-
💪
Durable Strain Relief: Molded boots on both connectors protect the cable from bending stress and ensure a reliable connection.
-
📡
Flexible RG58 Coax: Standard 50-ohm coax that is easy to route around corners and through tight spaces.
Technical Specifications
| Specification | Detail |
|---|---|
| Cable Type | RG58 Coaxial |
| Shielding | 95% Copper Braid |
| Length | 50 Feet (approx. 15.2 m) |
| Connector A | PL-259 (UHF-Male) |
| Connector B | PL-259 (UHF-Male) |
| Impedance | 50 Ohm |
| Application | Base station or mobile antenna runs |
Available After November 28th
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.