Fleetwood Digital
High Frequency Fully Shielded NMO Mobile Antenna 3/4" Hole Mount With 17" RG58 Coax And DIY PL259 Connector
High Frequency Fully Shielded NMO Mobile Antenna 3/4" Hole Mount With 17" RG58 Coax And DIY PL259 Connector
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
The NMO Mobile Antenna 3/4" Hole Mount is built for commercial riggers, fleet installers, and off-roaders who demand a permanent, low-profile antenna setup. Featuring a standard 3/4" brass NMO base and 17 feet of low-loss RG58 coaxial cable, this mount provides superior grounding and weather tightness for long-term vehicle deployment.
🛠️ Pro Installer Advantage: Unfitted Crimp Connector
This kit includes a loose, field-installable Crimp-On PL-259 connector (not pre-attached). This deliberate design gives you total routing flexibility: easily run the raw RG58 coaxial cable through tight firewall grommets, interior trim, and narrow pillars without drilling massive holes. Once the cable is seamlessly routed, simply trim to length, strip, and crimp the connector for a clean, custom, factory-quality install.
Performance & Design Highlights
Engineered for rugged environments, the DistribuComm NMO mount ensures max RF connectivity while protecting your vehicle's cab from the elements.
-
🚗
Standard 3/4" Hole Installation Fits all standard 3/4" drilled vehicle roof or body holes, installing easily from the outside of the cab.
-
✂️
DIY Cable Routing Unterminated cable end allows you to pull coax through tight vehicle channels before installing the connector.
-
📡
17-Foot RG58 Coaxial Cable Provides generous length to reach trunk, dashboard, or console mobile radio locations in full-sized trucks and SUVs.
-
🌧️
Weatherproof Brass Mount Heavy-duty solid brass contacts and rubber o-ring seal prevent moisture intrusion into your vehicle headliner.
Technical Specifications
| Mounting Style | 3/4" Through-Hole NMO |
|---|---|
| Cable Type | RG58 A/U Coaxial Cable |
| Cable Length | 17 Feet (approx. 5.2m) |
| Connector Included | PL-259 (UHF Male) Crimp-On Type |
| Connector Status | Unattached / Field Install Required |
| Base Material | Solid Brass with Gold Contact Pin |
Description
The NMO Mobile Antenna 3/4" Hole Mount is built for commercial riggers, fleet installers, and off-roaders who demand a permanent, low-profile antenna setup. Featuring a standard 3/4" brass NMO base and 17 feet of low-loss RG58 coaxial cable, this mount provides superior grounding and weather tightness for long-term vehicle deployment.
🛠️ Pro Installer Advantage: Unfitted Crimp Connector
This kit includes a loose, field-installable Crimp-On PL-259 connector (not pre-attached). This deliberate design gives you total routing flexibility: easily run the raw RG58 coaxial cable through tight firewall grommets, interior trim, and narrow pillars without drilling massive holes. Once the cable is seamlessly routed, simply trim to length, strip, and crimp the connector for a clean, custom, factory-quality install.
Performance & Design Highlights
Engineered for rugged environments, the DistribuComm NMO mount ensures max RF connectivity while protecting your vehicle's cab from the elements.
-
🚗
Standard 3/4" Hole Installation Fits all standard 3/4" drilled vehicle roof or body holes, installing easily from the outside of the cab.
-
✂️
DIY Cable Routing Unterminated cable end allows you to pull coax through tight vehicle channels before installing the connector.
-
📡
17-Foot RG58 Coaxial Cable Provides generous length to reach trunk, dashboard, or console mobile radio locations in full-sized trucks and SUVs.
-
🌧️
Weatherproof Brass Mount Heavy-duty solid brass contacts and rubber o-ring seal prevent moisture intrusion into your vehicle headliner.
Technical Specifications
| Mounting Style | 3/4" Through-Hole NMO |
|---|---|
| Cable Type | RG58 A/U Coaxial Cable |
| Cable Length | 17 Feet (approx. 5.2m) |
| Connector Included | PL-259 (UHF Male) Crimp-On Type |
| Connector Status | Unattached / Field Install Required |
| Base Material | Solid Brass with Gold Contact Pin |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.