Samlex America
Samlex SEC-1223 23A / 25A Peak Switching Power Supply
Samlex SEC-1223 23A / 25A Peak Switching Power Supply
Couldn't load pickup availability
Why Buy?
Why Buy?
Not quite sure if this is right for you? Contact Us for expert advice!
Quick Specs
Quick Specs
Scoll down for more information about this item.
This is the workhorse power supply you've been looking for. The Samlex SEC-1223 is trusted by ham radio operators worldwide as the perfect, high-quality power source for 100-watt HF transceivers. It delivers a true 23 amps of continuous power in a compact, lightweight package.
This advanced switching supply provides clean, stable 13.8V DC power with minimal RF interference, all while weighing just 5 lbs. It's the ideal choice for powering your IC-7300, FT-891, or other 100W radio without the weight or desk space of a massive linear transformer.
-
⚡️
23A Continuous / 25A Peak Power: The perfect amperage rating to handle the 20-23A transmit draw of modern 100-watt HF radios.
-
🪶
Lightweight & Compact Design: The high-efficiency switching design weighs only 2.3 kg (5.1 lbs), saving valuable desk space.
-
📻
Radio-Friendly Switching Circuit: Advanced filtering ensures a clean, stable signal with low RFI, keeping your transmissions and receptions clear.
-
🛡️
Full Protection Circuitry: Safeguards your expensive radio gear with Over-Current, Short-Circuit, and Over-Voltage protection.
💡 Expert Tip: The Perfect Match for 100W Radios
A typical 100-watt HF transceiver (like an Icom IC-7300, Yaesu FT-891, or FT-991A) will draw 20-23 amps at full power. The SEC-1223 is engineered to handle this exact load continuously, allowing it to run cool and quiet without being over-stressed. This is the correct, reliable choice for your station.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | SEC-1223 |
| Type | Advanced Switching |
| Input Voltage | 100-120 VAC, 60 Hz |
| Output Voltage | 13.8 VDC (Fixed) |
| Output Current (Continuous) | 23 Amps |
| Output Current (Peak/Surge) | 25 Amps |
| Outputs | Rear Binding Posts (23A) |
| Cooling | Fan Cooled (Forced Air) |
| Protection Circuits | Over-Current, Short-Circuit, Over-Voltage |
| Weight | 2.3 kg (5.1 lbs) |
| Dimensions (L x W x H) | 22 x 19.5 x 8.5 cm |
Description
This is the workhorse power supply you've been looking for. The Samlex SEC-1223 is trusted by ham radio operators worldwide as the perfect, high-quality power source for 100-watt HF transceivers. It delivers a true 23 amps of continuous power in a compact, lightweight package.
This advanced switching supply provides clean, stable 13.8V DC power with minimal RF interference, all while weighing just 5 lbs. It's the ideal choice for powering your IC-7300, FT-891, or other 100W radio without the weight or desk space of a massive linear transformer.
-
⚡️
23A Continuous / 25A Peak Power: The perfect amperage rating to handle the 20-23A transmit draw of modern 100-watt HF radios.
-
🪶
Lightweight & Compact Design: The high-efficiency switching design weighs only 2.3 kg (5.1 lbs), saving valuable desk space.
-
📻
Radio-Friendly Switching Circuit: Advanced filtering ensures a clean, stable signal with low RFI, keeping your transmissions and receptions clear.
-
🛡️
Full Protection Circuitry: Safeguards your expensive radio gear with Over-Current, Short-Circuit, and Over-Voltage protection.
💡 Expert Tip: The Perfect Match for 100W Radios
A typical 100-watt HF transceiver (like an Icom IC-7300, Yaesu FT-891, or FT-991A) will draw 20-23 amps at full power. The SEC-1223 is engineered to handle this exact load continuously, allowing it to run cool and quiet without being over-stressed. This is the correct, reliable choice for your station.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | SEC-1223 |
| Type | Advanced Switching |
| Input Voltage | 100-120 VAC, 60 Hz |
| Output Voltage | 13.8 VDC (Fixed) |
| Output Current (Continuous) | 23 Amps |
| Output Current (Peak/Surge) | 25 Amps |
| Outputs | Rear Binding Posts (23A) |
| Cooling | Fan Cooled (Forced Air) |
| Protection Circuits | Over-Current, Short-Circuit, Over-Voltage |
| Weight | 2.3 kg (5.1 lbs) |
| Dimensions (L x W x H) | 22 x 19.5 x 8.5 cm |
Purchase With Confidence
Questions & Answers
Have a Question?
Be the first to ask a question about this.